See the specific of the compliane and patents associated with the IML Click trainer
In this article
This device complies with the following European Directives and USA/Canada Regulations:
Directive 1999/5/EC on radio equipment and telecommunication terminal equipment and the mutual recognition of their conformity
Directive 2006/95/EC on the harmonization of laws of member states related to electrical equipment designed for use within certain voltage limits
The USA Federal Communications Commission (FCC) Rules and Regulations
Industry Canada Rules and Regulations
This device complies with the following national and international standards:
EN 301 489-1 V1.6.1: 2005: EMR; EMC standard for radio equipment and services. Part 1: Common technical requirements.
EN 301 489-17 V1.2.1: 2002: EMR; EMC standard for radio equipment and services. Part 17: Specific conditions for 2.4 GHz wideband transmission systems and 5 GHz high performance RLAN equipment.
EN 300 328 V1.7.1: Electromagnetic compatibility and Radio spectrum Matters (ERM);Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques.
EN 60950-1: 2006: Information technology equipment – Safety. Part 1: General requirements
FCC Part 15B, 15.247: 10-01-2006: Radio Frequency devices: Operation within the bands 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz.
IC RSS-210 Issue 6: 2005: Low
FCC/IC Compliance
This device complies with Part 15 of the FCC Rules and RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The user is cautioned that changes or modifications to the device that are not approved by the manufacturer could void the user’s authority to operate the device.
EU Compliance
This device is a 2.4 GHz low power response system controller intended for residential and commercial use in all EU and EFTA member states.
ESD Notice
In extreme operating conditions, this Reply® product may be susceptible to Electrostatic Discharge (ESD) and other similar and rare transient events. Such ESD events may cause system interruption. Should an ESD event occur that causes system interruption, simply reset the Reply® Trainer by powering down and powering on.
Compliance and Patents
FCC, IC, CE and C-Tick certified. Call for details regarding these and other regulatory certifications.
› U.S. Patent Nos. 5,724,357; 6,021,119; 6,665,000.
› European Patent No. EP 0 697 773.
› Other U.S. and foreign patents and patents pending.
Reviewed and Approved by Global Support 27/01/23